Operations at Fire Stations: Difference between revisions

Jump to navigation Jump to search
→‎Basic Fire Station Operations: Added footnote leading to BEECN VHF radio channel list
(Updated link)
(→‎Basic Fire Station Operations: Added footnote leading to BEECN VHF radio channel list)
 
Line 84: Line 84:
g. The operator of the UHF handheld is responsible for regularly checking in with the BEECNs on their channel. This includes BEECNs on the channel not normally associated with the fire station (e.g. a BEECN whose operators cannot reach their normally assigned fire station may reach and need assistance from another).
g. The operator of the UHF handheld is responsible for regularly checking in with the BEECNs on their channel. This includes BEECNs on the channel not normally associated with the fire station (e.g. a BEECN whose operators cannot reach their normally assigned fire station may reach and need assistance from another).


<nowiki>*</nowiki>  If changing to channel 20 causes PNTC13 to appear on the radio's display, the channel is programmed with the BEECN simplex frequency.  If PNTC13 doesn't appear, the ARO can use the radio's VFO mode to select 144.410 MHz. On Icom transceivers VFO mode is accessed by pressing the [V/MHz] key to select VFO mode when the transceiver is not already in VFO mode. The [V/MHz] key is the right-most key below the display. Hint: If a small M is displayed to the right of the frequency, the transceiver is in Memory mode rather than VFO mode. .  
<nowiki>*</nowiki>  If changing to channel 20** causes PNTC13 to appear on the radio's display, the channel is programmed with the BEECN simplex frequency.  If PNTC13 doesn't appear, the ARO can use the radio's VFO mode to select 144.410 MHz. On Icom transceivers VFO mode is accessed by pressing the [V/MHz] key to select VFO mode when the transceiver is not already in VFO mode. The [V/MHz] key is the right-most key below the display. Hint: If a small M is displayed to the right of the frequency, the transceiver is in Memory mode rather than VFO mode. .  


Once the transceiver is in VFO mode, rotate the tuning knob on the right to select 144.410. If the initial frequency is a long way from 144.410, you can save time by briefly telling the transceiver to change frequency 1 MHz at a time by tapping the [V/MHz] key. The display should change to show fewer digits. After the first three digits show “144”, tap the [V/MHz] again to return to the normal VFO tuning mode.  
Once the transceiver is in VFO mode, rotate the tuning knob on the right to select 144.410. If the initial frequency is a long way from 144.410, you can save time by briefly telling the transceiver to change frequency 1 MHz at a time by tapping the [V/MHz] key. The display should change to show fewer digits. After the first three digits show “144”, tap the [V/MHz] again to return to the normal VFO tuning mode.
 
<nowiki>**</nowiki> [[Media:MCARES_2023_Frequency_Template_for_BEECN_VHF_Radios.pdf|Channel Assignments Used in BEECN VHF Radios]]


=== Radio Traffic Priorities ===
=== Radio Traffic Priorities ===

Navigation menu